RexShield 3-Part Satin (1110)

RexShield 3-Part Satin (1110) is a high-performance silicon-ceramic treatment engineered to deliver maximum protection and durability with a refined, low-sheen finish. Designed as a three-component system, it provides superior resistance to staining, microbial growth, and UV-related fading.

This advanced coating restores surfaces to a near-original appearance with a subtle satin finish, enhancing the natural color and character of stone, grout, and concrete without a high-gloss look. Its extreme hydrophobic properties help repel water and contaminants while increasing the coefficient of friction, resulting in a surface that remains slip-resistant even when wet.

RexShield 3-Part Satin is suitable for both porous and non-porous substrates, including tile and grout, concrete, and natural stone. For best results, do not apply to polished granite or other highly polished natural stone surfaces.

Once catalyzed, the system has a working pot life of approximately 6 hours, making it ideal for projects requiring shorter working windows and controlled application.

Click HERE for TDS

Contractor pricing available when logged in.

Size:

Quart Kit Pint KIt 8oz. Sample KIt

Variant

$100.00

Key Features

• Three-component, professional-grade silicon-ceramic coating system
• Engineered for maximum durability and long-term surface protection
• Superior resistance to staining, chemical exposure, and microbial growth
• Satin finish provides a refined, low-sheen appearance while enhancing surface color
• Extreme hydrophobic properties help repel water and contaminants
• Increases surface traction, helping maintain slip resistance even when wet
• Suitable for both porous and non-porous substrates
• Short working pot life of approximately 6 hours once catalyzed for controlled application
• Designed for demanding commercial, industrial, and high-use environments

Compatible Surfaces

• Tile and grout installations
• Concrete and masonry substrates
• Natural stone and paver surfaces
• Porous and non-porous surfaces

Note: Do NOT use on polished granite or other highly polished natural stone surfaces. Honed or unpolished natural stone surfaces are acceptable.

Application Overview

1. Surface Preparation
Ensure the surface is clean, dry, and free of contaminants, including dirt, oils, and previous residues. Proper preparation is critical to achieving optimal adhesion and performance.

2. Mixing
Combine all three components according to product instructions and mix thoroughly to achieve a uniform solution. Once catalyzed, the system has a working pot life of approximately 6 hours.

3. Application
Apply evenly using a microfiber applicator, pad, or appropriate tool. Work in manageable sections and plan application accordingly due to the shorter working time.

4. Leveling & Coverage
Ensure uniform distribution across the surface to achieve an even, satin finish. Avoid over-application or allowing excess material to pool.

5. Dry Time
Allow the surface to dry before light use. Dry time will vary depending on environmental conditions.

6. Cure Time
Full cure and maximum performance will develop over time as the coating fully cross-links.

7. Inspection
Inspect the surface for uniform appearance, finish consistency, and coverage across the substrate.

Note: Due to the shorter working time of this system, proper planning and timely application are critical. Always test in a small, inconspicuous area prior to full application.

RexShield 3-Part Satin (1110)

$100.00