Amber Coatings Stripper - Quart (formerly A6 Coatings Stripper)

• High-performance, concentrated alkaline formula
• Designed to remove durable coating systems, including silane, siloxane, and silicone-based sealers
• Effective for removing RexPro 3-Part Glossy/Satin systems and Affinity (chameleon) coatings
• Works by breaking down and degrading coating bonds for efficient removal
• Suitable for use on a variety of coated surface types (see compatible surfaces)
• Professional-grade formulation for demanding removal applications

NOTE: Do NOT use on zinc or aluminum surfaces

• Concrete and masonry surfaces
• Natural stone and pavers
• Tile and grout installations
• Surfaces previously treated with silane, siloxane, or silicone-based coatings

1. Surface Preparation
Begin by mechanically preparing the surface using a floor machine, sanding screens, or stripping pad to open the coating and improve stripper penetration.

2. Apply Stripper
Evenly apply Amber Coatings Stripper across the surface using a squeegee or similar tool. Ensure full coverage.

3. Dwell Time
Allow the product to dwell for approximately 20–30 minutes. Keep the surface wet during this time by redistributing the product as needed.

4. Agitation
After dwell time, agitate the surface using a floor machine with a stripping pad, sanding screen, or bristle brush to break down the coating.

5. Detail Work
Use a hand-held brush or appropriate tool to address grout lines, edges, and hard-to-reach areas.

6. Removal & Rinse
Remove slurry and debris using a mop, extractor, or wet vacuum. Thoroughly rinse the surface and perform a final neutralizing rinse if needed.

7. Inspection
Allow the surface to dry and inspect for remaining coating. Repeat the process if necessary until the coating is fully removed.

Note: Multiple applications may be required depending on coating thickness and condition. This is normal for durable coating systems.

*View Full Stripping Guide (PDF) (see Technical Documents)
**Watch Application Video (see Technical Documents)